We manufacture and export rectangular, Constant Temperature Water Baths also known as double walled construction. Its Inner chamber is made of stainless steel and outer body made of mild steel duly powder coated. Temperature range 5oC above ambient to 99oC. Fitted with immersion type heater, digital temp. Controller cum indicator accuracy 1.5oC. Operating on 230V AC. fitted with circular pump with stirrer.

Temp. Range : Ambient to 0 ° C TO 100 ° C/ -20 ° C TO 100 °C/ -30 ° C TO 100 ° C/ -40 ° C TO 100 ° C/ -70 ° C TO 100 ° C 
» Accuracy : +0.1 °C to 0.5 °C
» Applications Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C 
» Laboratories & to suit the various IS standards. 

Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top. 

Circulation : Efficient motor of 1440 RPM top mounted is installed for stirring to get temp uniformity. 

Heaters : S. S. tubular heaters for maintaining of temp. Refrigeration System : Hermetically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40oC/ -70oC, Refrigerant CFC Free. 

Temp Control : Digital temp controller housing all the controls, switches with PT-100 sensor. 

Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller. Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards. 

Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor. 

Special Care : A suitable K. V. A. Servo Controlled Voltage Stabilizer is recommended.

Rectangular Water Bath is useful for boiling and general purpose work. Rectangular water bath is made up of long lasting single walled kettle element. Made of thick gauge stainless steel, the lid is having 6 or 12 holes with concentric rings. 

We offer Cryostat Baths/Recirculators that provides a simple and reliable solution for obtaining consistent results. Available in varied configuration and specific requirement of our clients, below mentioned are the technical details of our products. 

Features :

Temp Range : Above ambient to 99.9°C, 0 °C TO 99.9 °,C, -10 °C to 99.9 °C 
Accuracy : ±0.1 °C TO 0.5 °C 

Application : Equipment specially designed for tests in the field of medical, agricultural, bio-chemical, R & D & Q. C. Laboratories 

Construction : Double walled, exterior of CRCA /GI, non-contaminant epoxy powder coated & inner chamber of AISI S.S. 304, with PUF insulation, S.S. Lid on top with provision fro Holding viscometer holders 

Circulations : Efficient motor of 1440 RPM Top mounted is installed for stirring to get temp uniformity 

Heaters : S. S. Tubular Heaters for maintaining of temp. 

Refrigeration Systems : Hermetically sealed compressor provides temp. for below ambient conditions, Refrigerant CFC free 

Temp. Control : Solid State Electronic Digital Temp. Control Panel housing all the control switches with PT – 100 sensor. 

Optional : Models available as per GMP, Complete S.S unit, Strip Chart Recorder. Microprocessor based PID temp. Control with printer interface, RS 232 CPC, RS-485 interface for multiple networking of controller. 

Validation Protocols : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificate traceable to National & International Standards. 

Safety Features : Safety thermostats for over shooting of temp. safety circuit to cut off the whole system in case of malfunction ( Applicable to microprocessor based models only) HRC fuses for compressor heaters & mains, time delay circuit for safety of compressor 

Special care : A suitable K.V.A. servo controlled voltage stabilizer is recommended.

Features :

Temp Range : Above ambient to 99.9°C, 0 °C TO 99.9 °,C, -10 °C to 99.9 °C 
Accuracy : ±0.1 °C TO 0.5 °C 

Application : Equipment specially designed for tests in the field of medical, agricultural, bio-chemical, R & D & Q. C. Laboratories 

Construction : Double walled, exterior of CRCA /GI, non-contaminant epoxy powder coated & inner chamber of AISI S.S. 304, with PUF insulation, S.S. Lid on top with provision fro Holding viscometer holders 

Circulations : Efficient motor of 1440 RPM Top mounted is installed for stirring to get temp uniformity 

Heaters : S. S. Tubular Heaters for maintaining of temp. 

Refrigeration Systems : Hermetically sealed compressor provides temp. for below ambient conditions, Refrigerant CFC free 

Temp. Control : Solid State Electronic Digital Temp. Control Panel housing all the control switches with PT – 100 sensor. 

Optional : Models available as per GMP, Complete S.S unit, Strip Chart Recorder. Microprocessor based PID temp. Control with printer interface, RS 232 CPC, RS-485 interface for multiple networking of controller. 

Validation Protocols : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificate traceable to National & International Standards. 

Safety Features : Safety thermostats for over shooting of temp. safety circuit to cut off the whole system in case of malfunction ( Applicable to microprocessor based models only) HRC fuses for compressor heaters & mains, time delay circuit for safety of compressor 

Special care : A suitable K.V.A. servo controlled voltage stabilizer is recommended.

Water Still (Manesty Type), unit is made up of complete S. S Designed to provide pyrogen free distilled water of very high degree of purity. Easy wall mounting Condenser cave be opened easily for periodic cleaning. The still is fitted with immersion type heating element. It is provided with iron bracket to be fixed on the wall. Easy replaceable heating elements The lid perfectly rest and get inside the collar on head of the tank which avoids loss of steam and jumping of lid. Various sizes available.

Water Bath ( Thermostatic), Double walled in construction. Inner chamber SS and outer made of M.S. with powder coating, Temp. range 5°c above ambient to 95oc accuracy + 2oc. Temp. controlled by capillary type thermostat. Top lid with concentric rings made of stainless steel. The gap between the inner and outer chamber filled with glass wool insulation to minimize heat loss. Immersion type Heater should be provided. Long lasting elements Concentric rings to use flask from 50 ml to 500 ml capacity.